Streak-Free Ways to Clean Your Car Windows

1. Gather Your Supplies
   Before diving into the cleaning process, make sure you have all the necessary supplies on hand:
   
   
   Glass cleaner: Choose a high-quality, automotive-specific glass cleaner for best results.
   
   Microfiber towels: Opt for lint-free, high-quality microfiber towels to avoid streaks.
   
   Rubbing alcohol: Rubbing alcohol and water can work wonders on stubborn stains.
   
   Scraper tool: A plastic scraper tool can help remove tough spots like bird droppings or adhesive residue.
   
   Distilled water: Using distilled water helps prevent streaks caused by mineral deposits.
2. Choose the Right Time and Place
   Select a shady spot and a fantastic day to clean your car windows. Direct sunlight can cause the cleaning solution to dry too quickly, leaving streaks behind. Additionally, washing in the heat can make the process more tiring, and you might rush through it.
3. Remove Loose Debris
   Before applying any cleaning solution, remove loose debris from the windows. Use a soft brush or a microfiber cloth to sweep away dust, dirt, and loose particles gently. This step helps prevent scratches during the cleaning process.
4. Start with the Interior
   Begin by cleaning the interior side of the windows. This step helps eliminate any hazy residue from the dashboard or interior surfaces that might accumulate on the windows over time. Spray the glass cleaner onto a clean microfiber towel, not directly onto the glass, to avoid overspray. Wipe the interior windows in a circular motion, followed by a horizontal and vertical movement to ensure complete coverage.
5. Work on the Exterior
   For the exterior, follow these steps:
   
   a. Wet the window: Rinse the window thoroughly with water to remove loose dirt and debris.
   
   b. Apply glass cleaner: Spray the glass cleaner evenly onto the exterior window surface. Again, avoid spraying too much, as excess cleaner can leave streaks.
   
   c. Use a proper technique: Use one microfiber towel to wipe the glass in a horizontal motion and another for a vertical motion. This cross-hatch pattern ensures thorough cleaning and reduces streaking.
   
   d. Deal with stubborn spots: For stubborn stains or spots, mix rubbing alcohol with water in a 1:1 ratio and apply it to the affected area. Gently rub with a microfiber towel or use a scraper tool if needed.
   
   e. Dry quickly: Work swiftly to prevent the cleaning solution from drying on the window. Dry the exterior with a separate, clean, dry microfiber towel.
6. Finishing Touches
   To ensure streak-free windows, inspect them under different lighting conditions. If you spot any streaks or smudges, reapply the glass cleaner and use a clean microfiber towel to buff them away.